Скачать или смотреть Samsung A31 ISP Pinouts | eMMC Test Points | UFS / ISP Pinout Diagram | Hardware Repair Guide

In this video we provide the Samsung A31 ISP pinouts / eMMC pinouts for professional data repair work such as firmware write, dead boot repair, FRP remove (authorized), userdata dump, boot repair, and testing.

These ISP points help technicians perform direct data access to eMMC/UFS using boxes & tools like UFI, EasyJTAG, Medusa Pro, MRT, Hydra, and similar.
No voice-over used — visuals only for clarity.

🔎 30 Most Searching Titles Before Steps

Samsung A31 ISP pinouts

Samsung A31 eMMC pinout diagram

Samsung A31 UFS ISP solution

Samsung A31 test point ISP

Samsung A31 dead boot repair

Samsung A31 ISP for UFI box

Samsung A31 ISP EasyJTAG pin

Samsung A31 UFS pinout ways

Samsung A31 storage chip ISP

Samsung A31 FRP ISP method

Samsung A31 dump data ISP

Samsung A31 UFS test points

Samsung A31 eMMC direct wiring

Samsung A31 ISP without removing IC

Samsung A31 boot repair ISP

Samsung A31 ISP for memory access

Samsung A31 ISP eMMC read write

Samsung A31 logic board pinouts

Samsung A31 UFS repair method

Samsung A31 box ISP connection

Samsung A31 ISP schematic

Samsung A31 short test point

Samsung A31 ISP for authorized work

Samsung A31 ISP service mode

Samsung A31 memory pin diagram

Samsung A31 ISP jumper points

Samsung A31 CPU ISP communication

Samsung A31 ISP in-circuit reading

Samsung A31 EDL ISP alternative

Samsung A31 data recovery ISP

🔧 30 Step-by-Step Hardware Repair / ISP Guide

Disassemble Samsung A31 carefully.

Remove back cover.

Disconnect battery.

Remove mainboard from body.

Protect flex cables.

Remove shields if required.

Locate UFS/eMMC memory chip.

Check board revision (important for orientation).

Identify ISP pads near memory.

Clean pads with IPA before wiring.

Map CLK, CMD, DAT0, VCC, VCCQ, Ground.

Verify no corrosion on pad area.

Prepare wires for ISP connection.

Match with UFI/EasyJTAG pinout layout.

Connect Ground first.

Connect VCC/VCCQ with controlled power.

Connect CLK, CMD, DAT0 lines.

Do not miswire (risk short).

Connect USB cable to box.

Use correct software module.

Identify storage.

Read eMMC/UFS info.

Backup important partitions.

Repair dead boot (if required).

Write firmware partitions (if needed).

Disconnect safely.

Remove wires.

Reassemble mainboard.

Complete phone assembly.

Final boot test.

🔥 Hashtags

#SamsungA31 #ISPPinout #eMMC #UFS #DataRepair #EasyJTAG #UFIBOX #DeadBootRepair #HardwareRepair #TestPoint