How to Replace Serpentine Belt Tensioner 2009-2015 Honda Pilot

Buy Now!
New Accessory Drive Belt Tensioner from 1AAuto.com https://trq.video/ib-1AEBT00100

This video shows you how to install a new TRQ tensioner pulley in your 2009-2015 Honda Pilot. The tensioner is a springed device that keeps the serpentine belt in your vehicle at the correct tension to keep it on the pulleys, without being so tight that it breaks. Eventually the tensioner may become worn, loose, or stuck, resulting in belts that squeak, slip, or fall off.

This repair was done on a 2011 Honda Pilot EX 3.5L Sport Utility 4-Door and the process should be similar on the following vehicles:
2009 Honda Pilot
2010 Honda Pilot
2011 Honda Pilot
2012 Honda Pilot
2013 Honda Pilot
2014 Honda Pilot
2015 Honda Pilot

Tools you will need:
• Flat Blade Screwdriver https://trq.video/obhS-1AXAA00013
• 17mm Wrench https://trq.video/oUM-1AXAA00010
• 12mm Socket https://trq.video/obri-1AXAA00015
• 19mm Socket
• Ratchet https://trq.video/obyo-1AXAA00016
• Socket Driver
• Torque Wrench https://trq.video/oaCb-1AXAA00044

Subscribe:    / @trq  

Check out our playlist:
Honda Pilot 2nd Generation 2009-2015:    • Honda Pilot 2nd Generation 2009-2015  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.