I finally lowered my Mitsubishi Magna (before and after)

In this video I finally, after 19 years of ownership, lower my 2001 Mitsubishi Magna TJ series sedan (also called a Diamante in non-Australian markets). I talk about the process, some considerations and setbacks and showcase the before and after so that you can see the change in ride height and overall appearance.

Ride height (measured from wheel arch to centre wheel cap)
Original / standard: front and rear 405mm
Lowered: front 380mm and rear 365mm (25mm and 40mm drops respectively)

Tools you'll need:
Socket set with 12mm to 17mm sockets
Impact wrench with 17mm, 19mm and 21mm impact sockets
Spanner (17mm)
Spring compressors (min of 3 and where you'll need the 19mm and 21mm impact sockets depending on the type you have)
Jack (preferably a trolley jack)
Bottle jack
Jack stands

Parts you'll need and estimated online prices:
Front + rear sport low coil springs x4 (from $350)
Front shock absorbers x2 (from $155)
Rear shock absorbers x2 (from $70)

Parts that I recommend you replace at the same time:
Front strut mounts x 2 (from $70)
Rear strut mounts x2 (from $82)