Carbon Fiber Wet Layup: Part 2

Continuation of relearning the composite wet layup process after 20 years. This part 2 covers mixing epoxy, wet layup, curing, removing peel ply and trimming the carbon fiber sample.

Part 1 covers cutting the carbon fiber and peel ply, waxing and PVA coating the surface the carbon fiber will be laid upon.

Part 2 covers the actual wet layup and peel ply wet-out, releasing the carbon fiber and removing the peel ply.

The ultimate reason for this piece of carbon fiber is for comparison testing with aluminum.

Patreon:   / ultralight_airplane_workshop  
Facebook:   / ultralightairplaneworkshop  
Website: https://www.thumpdataworks.com/Ultral...

Music: https://www.bensound.com