Airworld Me-262, Twin 90mm EDF - Flight Review

Flight review of my winter/spring build project, the full composite airworld 2m ME-262, twin 90mm EDF. Now I'll say right at the start this video was a rush job, so its not the usual standard of presentation, but I had a lot of good flights with her today so wanted to post my initial review.

I say initial as, (as noted in the video) this model is not yet finished. It sports a temporary scheme just for the test flying portion of its career. Now that I'm getting it dialed in it will have a full Luftwaffe scheme applied later this summer, but for now here she is.

I have created a retroactive build thread on RCG and will cover points and details of the build there and update when I apply the new scheme, it can be found here:

https://www.rcgroups.com/forums/showt...

Basic spec are:
2m span, full composite airframe from Airworld.
running 2 x Wemotec 90mm fans with inrunners (HET 650-68-2000kv)
using 2 x 130amp HV esc and 6S 6200mah lipos per side, pulling approx 104amp at full throttle, flight times 5+ mins.
AUW RTF 8.4kg
Robart electric retracts (105 degree nose, 85 degree mains)

Big thanks to Frank Born from Germany for all his help in this build and for the wondering ducting and motor mount designs and 3DP parts. Thanks to Patrick in Austria for his help and cut files for the battery bay plywood parts and to Dave on RCG for his help too and of course Andries on the camera for this video.