X-Plane Pilot2ATC Class C to Class C cross-country flight

Here is a little cross-country that really exercises the ATC system and illustrates a lot of the features of Pilot2ATC. It's a short 53nm jump from Raleigh-Durham International Airport, North Carolina to Fayetteville Regional Airport. Both of these airports are Class C so filing a VFR flight plan is the best way to obtain all the necessary clearances. The flight illustrates all the hand-offs from Ground, Departure, Center and all the way back to Ground at the destination. Also, clouds were encountered at the assigned altitude and communication with Center was necessary to keep the controller informed. There were a number of odd-ball "simulator" quirks encountered along the way too like planes taking off on the wrong runway, a bombardment of traffic alerts and a very strange dip at the threshold of the destination runway. All added to the fun.

Hope you enjoy!

Table Of Contents
Introduction 00:00
Listening to ATIS 01:03
Opening the Flight Plan 01:50
Taxi to Runway 02:44
Take-off Clearance 04:33
Turning to En-Route Heading 06:36
Departure Handoff 07:44
Avoiding Clouds 08:42
Washington Center Handoff 09:30
Climbing Back to Altitude 11:08
Approach Handoff 11:20
Pilotage Landmarks 12:38
Destination Tower Handoff 13:23
Landing Instructions 14:20
Left Downwind 15:53
Clear of the Active Runway 18:17
Taxi to GA Parking 18:46

Equipment and Software Used:
X-Plane 11.33
www.x-plane.com
Pilot2ATC
pilot2atc.com
X-ATC-Chatter
www.stickandrudderstudios.com/x-atc-chatter-overview
XChecklist
forums.x-plane.org/index.php?/files/file/20785-xchecklist-linwinmac3264
X-Camera
www.stickandrudderstudios.com/x-camera
TrackIR 5
www.naturalpoint.com/trackir
CH Products controllers
www.chproducts.com