Hobie Kayak Rudder Line Replacement Using SUPERGLUE!!

Here's a way to avoid purchasing the Hobie rudder tubes when changing out your Hobie Rudder control lines. Here in this video I am only replacing the rudder up/down lines, which were tied and trimmed from the factory which made it way too short to re-tie again. the steering lines were still in good condition and didnt have to be cut, and were long enough to re-tie to the rudder.
My other option was to splice in a new line section to the pull lines but since the rudder line tubes were so long, the splicing knots would bump up against the tube ends and impede movement.

To be clear, the superglue splice connection is only intended to help fish the new line in, and the glued splice will be cut off after the new lines are pulled through the tubes.