Скачать или смотреть etrailer | Breaking Down the Peterson Great White LED Work Light

Click for more info and reviews of this Peterson Work Lights:
https://www.etrailer.com/Work-Lights/...
Check out some similar Work Lights options:
https://www.etrailer.com/dept-pg-Work...

https://www.etrailer.com
Don’t forget to subscribe!
   / etrailertv  

Full transcript: https://www.etrailer.com/tv-Demo-Pete...
Today we're going to take a look at the Peterson Great White LED Worklight. Now this going to be a spot beam, which is going to be a nice focused light. Helps to concentrate that light into a nice bright round pattern, great for seeing at longer distances. So this will work out really well for instances where you're going to have this on off-road vehicle and need to light up a very great distance in front of you.The other nice thing about this light is that it's an LED design, so you don't have to worry about maintenance with this light, there's no bulbs to change out, no filaments that can break on you and the housing is going to be a very durable, aluminum die cast and the lens is going to be a polycarbonate, so it's going to be impact resistant. It's IP67 rated, which pretty much means that it's going to be impervious to dust and debris as well as water. So even if we have this outside, should not have any issues with any water or dust damage.It's going to be compatible with 12-volt and 24-volt DC systems.

We'll have two wires to connect, a power and ground, so black is going to be for power, white will be for ground. I'll go ahead and connect these and you'll see it's going to be a very bright light. So pretty bright, turn out the lights in the studio, you can get a better idea of how much light we'll get out of this in low light situations. So again that spot beam is going to really focus that light. I've got this about as far as my arm will reach, about three-and-a-half feet and still very bright there.It has six diodes in total, so it'll be a very nice durable light.

You don't have to worry about any rust and corrosion of the housing, again, no filaments that can break on us. So it's going to be great for those off-road applications or whenever we have this out in the world, we don't have to worry about this breaking on us.As far as dimensions, the face of it is about 4 and three-quarter inches, about four and thirteen-sixteenths to be exact and then measuring from the top of the light to the bottom of the bracket, which is included, it's about five and thirteen-sixteenths or again about five and three-quarters. The depth is about two and three-sixteenths or about two and- a quarter and that's measuring from the light face to the very back of the bracket, which is going to be the furthest out point.The light has an output of 1000 lumens, with a power draw of 12 volts of 1.73 amps or at 24 volts of 0.83 amps. Our wiring is about 10 inches of wire there to connect that up. I would suggest using some heat shrink butt connectors if you're going to have this outside, like mounted on a vehicle or a more rugged application.

Heat shrink butt connectors are just going to make sure that you have a waterproof connection for your wiring and you can find those here at etrailer.com.Our LEDs are also going to have a limited lifetime warranty from Peterson. And that's going to do it for our look at the Peterson Great White LED Worklight.