How to Replace Rear Sway Bar Links 2006-10 Dodge Charger

Buy Now!
New Sway Bar Link from 1AAuto.com http://1aau.to/ia/1ASSL00395

Sway bar links connect the sway bar (stabilizer bar) to other suspension components. They have a movable joint that can be damaged or wear out over time. When that happens, the joints get loose, and rattle. This video shows you how to install new TRQ sway bar links on your 2006-10 Dodge Charger.

• Check here for more videos on the 2006-10 Dodge Charger:    • Dodge Charger 2006-2010  6th Generation  

This process should be similar on the following vehicles:
2006 Dodge Charger
2007 Dodge Charger
2008 Dodge Charger
2009 Dodge Charger
2010 Dodge Charger

Tools you will need:
• 16mm Wrench
• 15mm Socket http://1aau.to/oa/1AXAA00015
• 17mm Socket http://1aau.to/oa/1AXAA00015
• 1/2 Inch Air Impact Gun http://1aau.to/oa/1AXAA00252

Subscribe:    / @trq  

Check out our playlist:
Dodge Charger 2006-2010 6th Generation:    • Dodge Charger 2006-2010  6th Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.