Laser Cut Sewing Box (not just for sewing) | Free Files Included

How to make a DIY two-floor (tool) box (aka a sewing box). This box is a great gift for, well... anyone! I use it for my electronics, and it's Gridfinity-compatible, so you can add Gridfinity trays if you want (100% optional). Learn how to make your own in this short video!

Any suggestions or request for my next videos? Leave them in the comments or contact me via my website (nirlivne.com).

Cut settings (xTool D1 (10W) diode laser):
6mm plywood - power: 85%, 6.5 mm/sec, passes: 3, kerf: 0.09mm.
3mm plywood - power: 80%, speed: 10 mm/sec, passes: 3, kerf: 0.09mm.
indentations - power: 90%, speed: 45 mm/sec, line-interval 0.1mm (fill mode), passes: 1.

Free files and more instructions can be found in the instructable article I wrote (free & no login required):
https://www.instructables.com/Laser-C...

More projects & more about me on my website:
https://nirlivne.com/personal-project...

Music by HoliznaCC0 from the Free Music Archive. Thank you so much! :)

Some of the links below are affiliate links, but all of them were tried and tested, and you can see my opinion about them in the parenthesis :)

-- Cheap wide-angle camera suitable for Lightburn (pretty crappy but it gets the job done at $17!) - https://s.click.aliexpress.com/e/_Dcj...


Chapters!
00:00 Intro, Materials & Productions
00:55 Assembly & Post Processing
03:59 Making Indentations Using a Laser Cutter
04:25 Results!