How to Replace Wheel Hub & Bearing 2010-2013 Ford Transit Connect 2.0L

Buy Now!
New Wheel Bearing from 1AAuto.com http://1aau.to/ia/1ASHF00544

This video shows you how to install a wheel hub & bearing on your 2010-2013 Ford Transit Connect 2.0L. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.

This process should be similar on the following vehicles:
2010 Ford Transit Connect
2011 Ford Transit Connect
2012 Ford Transit Connect
2013 Ford Transit Connect

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/oa3y/1AXAA00013
• Pry Bar http://1aau.to/oIN/1AXAA00020
• 15mm Socket http://1aau.to/oa4j/1AXAA00015
• 19mm Socket http://1aau.to/o2B/1AXAA00043
• 24mm Socket
• 32mm Socket http://1aau.to/obS/1AAST00003
• 8mm Deep Socket
• Brake Caliper Hanger http://1aau.to/ofk/1AXAA00439
• Press
• Snap Ring Pliers
• Wire Cutters
• Torque Wrench http://1aau.to/oamN/1AXAA00044
• Copper Anti-Seize
• Rust Penetrant

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.