How To replace fan blower heater motor and resistor Volkswagen VW

Easy quick video tutorial on how to replace blower resistor and motor with no tools and in just 10 minutes.

How to fix a fan that doesn't work on low. If your interior AC/ Heat fan is not working on low, or one of the fan settings is not working, then you probably need to replace the blower motor resistor. This video will go though all of the steps.

Is your blower fan working only on the max (4 speed)? This is a common problem with the Volkswagen, Audi, Seat, Skoda cars.
You need a new heater resistor, in my case the motor was noisy so I replaced that one as well.

Blower motor replacement. How to replace a blower motor in your car DIY. How to fix blower motor that's not working. Blower motor location, inspection, removal and replacement. DIY car repair.

Steps for the blower fan resistor:
- Remove the plastic screws
- Remove the cover
- Locate the blower fan resistor and remove it
- Remove the electric connector
- Take the new resistor, connect the connector
- Insert back in place

Steps for the blower fan motor:
- Remove the electric connector
- Pull the little arrow on the motor then rotate clockwise
- Remove the motor by pulling it down
- Insert the new fan motor
- Align the arrow then turn it anticlockwise
- Plug the connector
- Put back the cover and screw the plastic screws

I hope that this tutorial is helpful for someone.
Thanks for watching!
If you have any questions let me know in the comment section below, thanks.

Follow me on twitter!

AND

Subscribe for more videos!
https://www.youtube.com/channel/UC3I_...

THANKS!

~-~~-~~~-~~-~
Please watch: "Tutorial How to P0325 Knock sensor replacement"
   • How to P0325 Knock sensor replacement...  
~-~~-~~~-~~-~