How To Change a Mountain Bike Tire and Inner Tube (Bicycle tyre lever set) 2024

Hi in this video I show you how I change a MTB mountain bike rear tire Schwalbe Racing Ralph and Schwalbe inner tube, the tire was worn down, and also needed a new inner tube. You will also see how i remove the rear wheel and put it back in place again.

Tire Schwalbe Racing Ralph 26'' x 2.25 - http://amzn.to/2iNkgT1
Inner Tube Schwalbe SV13 w. Presta Valve - http://amzn.to/2iNkbyz
Park Tool Tire Lever Set - http://amzn.to/2jmW676
Bike Repair Tools - https://amzn.to/3dIX9WT
Bike Repair Stand - http://amzn.to/2jR6Ne6
Alloy Anodized Presta Valve Caps - http://amzn.to/2pwpMgD

Additional help information:
0:08 Click the chain down to smallest cog wheel.

0:40 Unboxing 'Rear Tire' 57-559 SCHWALBE Performance Racing Ralph, 26" x 2.25.

1:04 Unboxing 'Inner Tube' SCHWALBE 26" SV13.

5:57 Handy tips: If you get the tire almost all the way on and the last section is way to tight to get over the rim, you need to get more slack in the tire.
Start at the opposite side, and go around the part of the tire that's already in place compressing it and pushing the edges down into the rim so it gets as far in there as possible,
you end up with more slack in the section that is not mounted, and then you can usually get it over the rim by pushing it with the edge of your tire lever.

7:08 Inspection for the Inner tube not is stuck between tire and wheel rim.

8:20 Insure that the wheel is correct aligned in the dropouts.

Thanks for watching.
Best regards
Mazon99

#mazon99
#bicyclerepair
#mountainbiking
Danish accent