11 Rav4 V6 water pump, tensioner, idler pulley alternator, radiator and hoses, rear hub lug stud

This is a mostly unedited video documentation for purposes of helping me remove and install components with a reference. I am not a mechanic, nor do I take any responsibility for any attempts someone may try and use this as a guide to duplicate. This was not filmed by another, which made capturing the actual individual removal and installation difficult, but not the point of this video. I watched about 100 different videos and cross-referenced the online vehicle shop book to help with steps and torque settings. I tried to include part numbers as well. If you can find value in seeing the real struggle to doing this job as a 1st time attempt with some auto mechanic basic background skills and decent but not professional array of tools, then I'm glad I shared this video. I apologize for mixing bolts and nut terminology, and sometimes initially quoting incorrect specs, but tried to correct any that I discovered. Best of luck, and give yourself a lot of time, as well as have another set of hands for removing and installing those PITA water pump bolts under and around the WP pulley. Make friends with using jack to raise and lower engine when trying to access and remove all the WP bolts as well, and when removing and reinstalling the motor mount. While don't have to take radiator out of car strictly to do WP, and not even ALT, if doing the tensioner pulley assembly, I don't see how you could have enough room to do that part (pulling the AC compressor forward enough to access and remove the tensioner). While not complex or difficult, it certainly is time consuming, so give urself an entire weekend from Fri after work to Sun PM. I did this over a span of 3 weekends, but did more than just the title of video lists.