HP Probook 6470B Disassembly and fan Cleaning Laptop Repair | Bangla360's Technology

HP Probook 6470B Disassembly and fan Cleaning Laptop Repair | Bangla360's Technology

Cleaning the fan and disassembling an HP ProBook 6470B laptop can help improve its performance and prevent overheating. However, disassembling a laptop can be a delicate process, and it may void the warranty if you have one. Make sure to follow these steps carefully, and if you're not comfortable doing it yourself, consider seeking professional assistance.
Before you start, ensure you have the following:
• A clean, well-lit workspace.
• A small Phillips-head screwdriver.
• Compressed air or a small brush for cleaning.
• A container to organize screws.
• Thermal paste (if you plan to reapply it after cleaning).
• An antistatic wrist strap (recommended for preventing electrostatic discharge).
Disassembly and Fan Cleaning Steps:
1. Power Off and Unplug:
• Turn off the laptop and unplug the charger.
2. Static Discharge Prevention:
• If you have an antistatic wrist strap, wear it to prevent static discharge.
3. Remove the Battery:
• Flip the laptop over and slide the battery release latch to remove the battery.
4. Remove the Screws:
• Carefully remove all the screws from the bottom of the laptop. Keep the screws organized as they may be of different sizes.
5. Open the Laptop:
• Gently pry open the bottom cover of the laptop. It might be secured with plastic clips, so use a plastic pry tool if available. Start from a corner and work your way around.
6. Accessing the Fan:
• Once the bottom cover is removed, you should have access to the laptop's internal components. Locate the cooling fan, which is usually positioned near the CPU and heat sink.
7. Remove the Fan:
• The fan is secured with screws, so carefully remove them. You may also need to disconnect the fan's power connector from the motherboard.
8. Cleaning the Fan:
• Use compressed air or a small brush to clean the dust and debris from the fan blades, heatsink, and surrounding areas. Make sure to blow air in the direction that expels dust and dirt from the laptop.
9. Reapply Thermal Paste (Optional):
• If you removed the heat sink to access the fan, it's a good practice to reapply thermal paste to ensure proper heat transfer. Clean the old thermal paste off the CPU and GPU, apply a small amount of fresh paste, and reattach the heat sink.
10. Reassemble:
• Reverse the disassembly steps to put the laptop back together. Start by reattaching the fan and then securing it with screws. Make sure all connectors and cables are properly connected.
11. Replace Bottom Cover:
• Carefully place the bottom cover back onto the laptop and snap it into place. Secure it with the screws.
12. Reinsert the Battery:
• Slide the battery back into its slot and ensure it locks into place.
13. Power On:
• Plug in the charger, turn on the laptop, and make sure the fan is working properly.
After following these steps, your HP ProBook 6470B laptop should be clean and free of dust, which should help improve its cooling and overall performance. However, be cautious during disassembly and reassembly, and consider professional assistance if you're unsure about any step.


ＬＩＫＥ | ＣＯＭＭＥＮＴ | ＳＨＡＲＥ

Instagram ▶   / mdrubel_hossainbd  
Facebook Page ▶www.facebook.com/Bangla360Technology
Youtube ▶    / bangla360stechnologybd  
Twitter ▶ www.twitter.com/Bangla360Tec
Pinterest ▶ www.pinterest.com/Bangla360sTechnology/

Bangla360Technology ,Bangla360'sTechnology
Thank you for watching