How to change front wheel bearing on NISSAN MICRA 2 Hatchback [TUTORIAL AUTODOC]

How to change front wheel bearing / front hub bearing / front wheel bearing kit on NISSAN MICRA 2 K11 Hatchback 01.01.1992–12.2007 [TUTORIAL AUTODOC]

🔝 Top brands that produce wheel bearing: GSP.

📲 Buying via app is always cheaper than on the website!
❱❱ Install the AutoDoc App — https://interstitials.onelink.me/1036...

🛒 On our website you will find a wide range of auto parts you are interested in: https://goo.gl/v84585
Wheel bearing: https://goo.gl/uJopZw
Wheel bearing for NISSAN MICRA 2: https://goo.gl/hLm9dj

🔔 Subscribe to AUTODOC's channel and don't miss new videos on car parts replacement ➜ https://www.youtube.com/c/AutodocUk?s...

PDF How to replace front wheel bearing on NISSAN MICRA 2 Hatchback [TUTORIAL AUTODOC] — https://cdn.autodoc.de/uploads/man_pd...

00:23 — Use a 12-point socket №32. Loosen and remove the hub nut.
00:37 — Use a drive socket No.17. Use a ratchet wrench. Unscrew the brake caliper fastening
01:13 — Use a drive socket No.17. Use a ratchet wrench. Unscrew the end fastening nut to the steering knuckle.
01:33 — Use a combination spanner No.19. Remove the nut of the lower ball joint bolt.
01:47 — Use a ball joint remover. Using a special tool push the steering rod end out of the steering knuckle.
01:59 — Use a combination spanner No.17. Use a drive socket No.17 . Unscrew the lower fastener of the shock absorber strut.
02:21 — Remove the steering knuckle together with the hub.
02:36 — Use a flat screwdriver. Remove the inner wheel bearing oil seal.
07:44 — Install the steering knuckle in the wheel arch and pass the drive shaft through the hub center.
07:53 — Connect the ball joint of the control arm to the steering knuckle and install the ball joint fastening bolt.
08:19 — Tighten the lower fastening of the shock absorber. Use a combination spanner No.17. Use a drive socket No.17 .
08:45 — Screw the hub nut. Use a 12-point socket №32.
09:00 — Install the brake caliper and fix it. Use a drive socket No.17. Use a ratchet wrench.
09:43 — Connect the tie rod end to the steering knuckle and tighten it. Use a drive socket No.17. Use a ratchet wrench.

🛠️ The tools you need to replace wheel bearing:
12-point socket No. 32
drive socket No. 17
ratchet wrench
combination spanner No. 19
ball joint remover
combination spanner No. 17
flat screwdriver

Was this video helpful? Give it a thumbs-up and share it with your friends!

Have a look at other videos on our channel:
► NISSAN car repair tutorial —    • NISSAN car repair tutorial | Step-by-...  
► NISSAN MICRA 2 K11 car repair tutorial —    • NISSAN MICRA 2 (K11) car repair tutor...  
► How to replace front brake discs and front brake pads set on NISSAN MICRA 2 —    • How to change front brake discs and f...  
► How to replace front track rod end on NISSAN MICRA 2 K11 —    • How to change tie rod end / track rod...  

Mobile Shop: https://m.autodoc.co.uk

📢 AutoDoc in social media:
Facebook:   / autodoc.co.uk  
Twitter:   / autodoc_berlin  
YouTube:    / autodocuk  
Instagram:   / autodoc_autoparts  

#autodoc #autodoctutorial

Disclaimer:
This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements, that are a result of incorrect use or misinterpretation of the provided information. This video is for informational purposes only and does not guarantee achievement of a specific result. The user is personally liable for incorrect use of repair equipment, tools or car parts, in particular, when this use poses the risk of injury. AUTODOC strongly recommends being careful and adhering to the safety rules when doing any repair or replacement. Keep in mind that using low quality auto parts does not guarantee the proper level of road safety.

⚡ AUTODOC CLUB — https://club.autodoc.co.uk
Add your car to the AUTODOC CLUB garage and get personal recommendations on repair intervals — https://club.autodoc.co.uk/?to=/user/...
❱❱ Install the AUTODOC CLUB App — https://club.onelink.me/d2X8?pid=yout...