Скачать или смотреть Write .HEX file to Arduino Uno using the avrdyde command①

Arduino ISPでは無いノーマルなAuduino Uno使用
avrdydeコマンドを使ってArduino Unoに.hexファイルを書き込む
=========================================
Write .HEX file to Arduino Uno using the AVRDUDE command②
   • Write .HEX file to Arduino Uno using the A...  
=========================================
$ cd ~/Arduino/SSD1306_IC2_OLED
~/Arduino/SSD1306_IC2_OLED$ avrdude -c arduino -p m328p -P /dev/ttyACM0 -U flash:w:SSD1306_IC2_OLED.ino.standard.hex

avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.00s

avrdude: Device signature = 0x1e950f (probably m328p)
avrdude: NOTE: "flash" memory has been specified, an erase cycle will be performed
To disable this feature, specify the -D option.
avrdude: erasing chip
avrdude: reading input file "SSD1306_IC2_OLED.ino.standard.hex"
avrdude: input file SSD1306_IC2_OLED.ino.standard.hex auto detected as Intel Hex
avrdude: writing flash (20986 bytes):

Writing | ################################################## | 100% 3.36s

avrdude: 20986 bytes of flash written
avrdude: verifying flash memory against SSD1306_IC2_OLED.ino.standard.hex:
avrdude: load data flash data from input file SSD1306_IC2_OLED.ino.standard.hex:
avrdude: input file SSD1306_IC2_OLED.ino.standard.hex auto detected as Intel Hex
avrdude: input file SSD1306_IC2_OLED.ino.standard.hex contains 20986 bytes
avrdude: reading on-chip flash data:

Reading | ################################################## | 100% 2.69s

avrdude: verifying ...
avrdude: 20986 bytes of flash verified

avrdude: safemode: Fuses OK (E:00, H:00, L:00)

avrdude done. Thank you.

=========================
OS Xubuntu22.04LTS
Arduino IDE 1.8.19 (Linux)
avrdude version 6.3