AWD motor sync -3D printer - VzBoT

In this video, I show you a way to mechanically sync your motors together to avoid issues like vertical artifacts, extra load on motors, etc. Very simple and easy, but can be tricky if motor pulleys were first installed on the motor flat spot. It's a lot easier to install the pulleys on the round surface of the shaft for at least the front or rear motors (X + Y or X1 +Y1) before assembling the gantry and installing the belt. But if you didn't do that, this video is for you.

Stepper motor Activation macro (it also could be very useful to activate motors one at the time if you need, so you can use the gcode command too):
[gcode_macro enable_stepper]
gcode:
SET_STEPPER_ENABLE STEPPER=stepper_x ENABLE=1
SET_STEPPER_ENABLE STEPPER=stepper_x1 ENABLE=1
SET_STEPPER_ENABLE STEPPER=stepper_y ENABLE=1
SET_STEPPER_ENABLE STEPPER=stepper_y1 ENABLE=1

-Vz-HextrudORT: https://s.click.aliexpress.com/e/_DEZ...
-Goliath: https://s.click.aliexpress.com/e/_Dkk...
-Fly Super 8: https://s.click.aliexpress.com/e/_A8mOXD
-Drivers https://s.click.aliexpress.com/e/_AFDBtp
- XY Motors: https://s.click.aliexpress.com/e/_9iN6y9
-Alu Water cooling blocks: https://s.click.aliexpress.com/e/_Dn5...
-Fittings: https://s.click.aliexpress.com/e/_DEV...
-water cooling kit: https://s.click.aliexpress.com/e/_Dnc...
-CPAP fan: https://s.click.aliexpress.com/e/_Dmk...
-CPAP tube: https://s.click.aliexpress.com/e/_A9rUYd
-48V PSU: https://s.click.aliexpress.com/e/_Dcf...
(complete part list can be found on the BOM list on github link below)
-Eibos filament dryer: https://s.click.aliexpress.com/e/_Dc7...


Full VzBoT Printer project: (BOM, cad, stl): https://github.com/VzBot3D/

CNC Parts on Mellow Store Aliexpress or https://f3d-racing-fdm.myshopify.com/

Visit Mellow Store for VzBoT parts: https://mellow.aliexpress.com/store/g...


Please join us on FB:   / 4098868770205560  
Disord:   / discord  

If you wish to support: https://ko-fi.com/vez3d