Single Mosfet Mini SSTC Tesla coil with 10 + cm Spark

This project is sponsored by PCBWAY https://www.pcbway.com/?from=MirkoP
Only $30 for an SMT prototype order. Free shipping & free stencil.
You can make this miniature and simple Tesla coil in less than a day along with winding the secondary coil which contains only 500 turns. In addition, the final result is surprisingly good with a generated spark with a length of 10cm and more and relatively low consumption, especially when using the Staccato controller.
SAFETY NOTE: Please do not attempt to recreate the experiments shown on this video unless you are familiar with High Voltage Safety Techniques! Direct Current even above 60V maybe lethal, even when the AC supply voltage has been disconnected due to the stored energy in the capacitors. I have no responsibility on any hazards caused by the circuit. Be very careful. This is a humble request.

Detailed instructions, pictures, and schematic at :
https://www.hackster.io/mircemk/singl...

Chapters:
0:06 Short Demo
1:30 Description
2:42 Parts
6:10 First test and tunning
9:20 Demonstration
10:12 With Staccato interrupter
12:00 Staccato + SCR Regulator
13:58 Conclusion
14:51 Building

If you are interested in this area, see the Playlist at:
   • High Voltage  

If you like my job buy me a coffee: https://ko-fi.com/mircemk

Visit my Youtube Channel for more Projects , DIY and How To Make videos:
   / mirkopavleskimk  

by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !

#highvoltage #teslacoil #mosfet #pcbway