Add Needle Positioner to Your Juki DDL-8700

We show you how to assemble, attach and synchronize the needle positioner, motor, and control box onto your Juki DDL-8700. If you're mechanically inclined and purchased this kit from us, you should be able to figure out how to attach this whole system to other machines as well.

You can purchase this kit here https://www.cutsew.com/KM-NP-750-Need...

If this looks too complicated, we will soon have this as an attachment option available on our website. https://www.cutsew.com/

Here are some helpful links for the assembly of the Juki DDL-8700, which is not detailed in this video:

Full Assembly of Juki DDL-8700    • DIY Assembly Juki DDL-8700 How To Ste...  
Assembly of Table legs only    • DIY 8700 Section Three  
Drop in the Head    • DIY 8700 Section Seven  

And here are the sections outlined:

0:00 - Unboxing the kit
0:28 - Install Control Box
1:15 - Attach Motor Mount
2:37 - Tack Cables
2:52 - Attach Motor
5:58 - Connect Cables
6:32 - Power Needle Positioner
7:15 - Add Light
7:33 - Tie down Cables
8:16 - Add Table Legs
8:30 - Drop in Head
8:39 - Add Handwheel
8:45 - Attach Belt
9:03 - Tighten Motor & Add Belt Guard
10:19 - Add Bobbin Winder
10:35 - Add Upper Guard
10:46 - Add Needle Positioner
12:29 - Parts Needed
12:33 - Tools Needed
15:13 - Test Attachment
15:31 - Synchronizing