Скачать или смотреть 115 Mercury Outboard Starting Rebuild - Change Crank and Install Pistons & Rods

This Mercury 115 HP, 4 cylinder, 2 stroke engine had developed a very audible knock that seems the worst at idle. The engine ran fine otherwise and had been running like this for a while, except that the noise is increasing.
When we pulled down the powerhead, we found a badly scored / scuffed piston. In looking for a shop to do the machine work to rebore, we found an engine that had a broken crankshaft at the flywheel with other parts in good condition. We have chosen to use the block, pistons and rods from the donor engine and are taking the good crank from the original engine. We will reuse all the other parts (fuel and electrical) from the original engine as it is a newer model. We are cleaning up the parts, installing the pistons and rods, and torquing up the rod bolts.

DISCLAIMER: In my videos and written or text comments, I provide demonstrations, suggestions, and opinions on techniques, methods, and materials for various projects. While I try to be accurate, there are no guarantees, expressed or implied, that my information is correct and will work for you. If you wish to use any of this information, you must check and verify that it is appropriate for your use - use it at your risk. Do-it-yourself projects are variable and there are risks in conducting them.

© 2025 Dan5tech LLC