Скачать или смотреть toyota-hilux-spiral-cable-replacement -Fix Airbag Light & Horn Not Working

Why is Your Toyota Hilux Airbag Light On? (And How to Fix It!)
If your airbag warning light (SRS light) is illuminated, your safety system is compromised. While the car may still drive, ignoring this light means your airbags might fail to deploy in an accident. The most frequent culprit, especially in a Toyota Hilux, is a faulty Spiral Cable (also known as the Clock Spring).

🔎 Common Causes & The Spiral Cable Connection (Clock Spring)
The Spiral Cable is a crucial component located under the steering wheel. It maintains electrical continuity between the steering column and fixed parts like the airbag, horn, and steering wheel controls.

1. Faulty Spiral Cable (Clock Spring Failure): A tear or malfunction in the spiral cable cuts off communication between the steering wheel and the airbag module, instantly triggering the warning light. This is the most common cause for a permanent airbag light.

2. Airbag Control Unit (ECU) Failure: The brain of the SRS system. A faulty ECU will send an error signal, lighting up the dash.

3. Faulty Airbag Sensors: Modern vehicles have multiple crash sensors. Malfunction in the sensors or their wiring can cause the light to turn on.

4. Seat Belt System Issues: Defects in the seat belt pretensioners or seat sensors can also activate the light.

5. Low Battery Voltage: A weak or failing battery that can't supply the necessary voltage to the SRS system often triggers a fault code.

6. Loose or Corroded Connectors/Sockets: Loose wiring harnesses or corroded connectors within the airbag circuit can disrupt the signal.

🛠 The Solution: Don't Drive With the Airbag Light On!
Due to the critical nature of the airbag system, this is not a problem to ignore.

Visit a Specialist: Immediately consult a qualified mechanic or auto electrician.

Diagnostic Scan (Using a Diagnostic Tool/OBD-II): A skilled technician must use a professional diagnostic tool (DIAG) to read the specific fault code stored in the SRS unit. This code points directly to the faulty component (e.g., B0100 - Spiral Cable Fault).

Repair or Replacement: Once the faulty part (most often the Spiral Cable) is identified, it must be replaced or repaired.

Clear the Error Code: After the repair, the mechanic must use the diagnostic tool to clear the code and confirm the system is functioning correctly.