PS5 Custom LED buttons - Frosty White Mod

I made a custom white PS5 with light up buttons and logo. I also changed the orange standby light to blue. Matte white vinyl wrapped PS5, modified front buttons, and back lit PS Logo.
.........................................................
Subscribe & check out my other tech restoration and mod videos!

Follow me on Instagram:   / restoretechnique  
Buy Me a Coffee 😄 : https://www.buymeacoffee.com/restoretech

Filmed on: Samsung S10e

Back lit logo mod idea credit to:    / mymatevince  

Music:
Select - Patrick Patrikios
jazzyfrenchy - https://www.bensound.com

If the following Tools and Parts lists helped you, please considering leaving a comment :)
(not affiliate links)
Parts List:
- 2 x Blue 2mm LED 780mcd Tower Type Diffused. Resistor for 5VDC: 91Ω. Typical Forward Current: 20mA - https://www.jaycar.com.au/blue-2mm-le...
- 2" LCD
- 30AWG Kynar wire - https://www.jaycar.com.au/blue-wire-w...
- 0603 SMD LED's
- 2 x 150ohms resistors, 1 x 120ohms resistor
- 60/40 Solder
- Premium matte white vinyl, with air release channels
- Crafters Choice Square Acrylic Blank 4 Pack Clear - https://www.spotlightstores.com/craft...
- Kapton tape
- Blue plastic film
- Black electrical tape
- Tesa double sided tape

Tools:
- Hakko FX-888D Soldering Iron
- Phillips Head #0 Screwdriver
- Torx T8 security screwdriver
- Andonstar ADSM302 Microscope
- Silhouette Cameo 4 cutting machine
- Ozito Heat Gun - https://www.bunnings.com.au/ozito-200...
- Custom fume extractor -    • DIY Soldering Fume Extractor using a ...  
- Tec 305-12 hot glue gun
- Goot Wick desoldering braid 3.0mm & 1.5mm -
- KingBo RMA-218 Flux
- ChemTools 99.8% Isopropyl Alcohol
- Digitech QM1517 Multi-meter
- Dick Smith Precision Pliers
- 1500 Grit Sandpaper
- Sharpie black oil based marker
- Precision cutting blade
- Calipers