How to Rebuild Brembo Calipers 6-Pot 4-Pot Seals | 17z 18z GS-F RC-F

Rebuilding Brembo 17z brake calipers with new seals and boots. I found these at a local junkyard for the $80 (front), $60 (rear).

Here is a list of the combo of seals I used for 17z Front (34/36/38mm) and Rear (28/30mm).
Raybestos WK1554 (30/34/36mm, 2 sets) https://amzn.to/3RnkKzK - cross reference (Centric 143.42041, Carlson 15397, GS-F, RC-F, BMW M4, GT-R, etc use same) - https://amzn.to/3Tuynis
Raybestos WK3604 (28mmx4, 1 set) https://amzn.to/3R0fz9m - cross reference (Centric 143.37008, Carlson 15473, '19 Cayenne, '18 BMW M2/M3/M4 use same)
Raybestos WK2897 (38mmx4, 1 set) https://amzn.to/3Trc9xM - cross reference (Centric 143.37016, Carlson 41285, '10 Mini, '09 Chevy HHR/Cobalt use same) - https://amzn.to/3KyAei5

If you need the actual kits and can find stock here are the numbers, it may cost more but no hunting:
Front 17z (34/36/38mm) - Centric 143.33027 - https://ebay.to/3RnmskU
Rear (28/30mm - Carlson 15318 or Centric 143.37009- https://amzn.to/3qeHvKZ or https://ebay.to/3R3jK3Z
Front 18z (30/34/38mm) - Carlson 15319 or Centric 143.35037 - https://ebay.to/3AY3LPd

Brembo Bleeder Valves/caps (10 pack) - https://ebay.to/3BcbNmF
Brembo Stickers 12 Various Sizes - https://ebay.to/3BybbsM

These will fit IS300 using overkill engineering custom brackets. They require 2012+ GS350 F-Sport 14.1" rotors and rear IS-F/RC-F rotors.
I used Autosports Engineering 30mm Roll Center Adjusters:    • Installing Lexus IS300 Roll Center Ad...  

Subscribe and follow me on future episodes for fitting them onto the car.
Junkyard Video:    • Junkyard Brembo 6-Piston 17z Calipers...  
Caliper Cleaning Video:    • Refurbishing Brembo 6-pot 17z/18z Bra...  
IS300 Fitting Front:    • Lexus IS300 Brembo 17z 6-Piston Porsc...  
IS300 Fitting Rear:    • Lexus IS300 Brembo 17z 18z Rear 4-Pis...  
Caliper Powdercoating Vid:    • How to Powdercoat Brembo Brake Calipe...  
Hardware I ordered from BelMetric (shipping was $9.25):
Front:
4 x BSH12X1.75.30 - Allen Socket Head (BSH12X30) = $2.72
4 x BSH16X1.5X40 - Allen Head 12.9 Black (BSH16X1.5X40) = $6.88
4 x WL12CLZ - Lock Washer Zinc (WL12CLZ) = $0.56
4 x WL16MECLZ - Lock Washer Mechanical Zinc (WL16MECLZ) = $1.04
8 x WFHV16CLZ - Hardened Flat Washer Zinc (WFHV16CLZ) = $3.60
Rear:
4 x BSH14X1.5X30 - Allen Head 12.9 Black (BSH14X1.5X30) = $6.96
4 x BSH12X1.7525 - Allen Socket Head (BSH12X25) = $2.52
4 x WL12CLZ - Lock Washer Zinc (WL12CLZ) = $0.56
4 x WL14CLZ - Lock Washer Zinc (WL14CLZ) = $1.00

More info can be found at Overkill Engineering's site: http://5thgencelica.com/
----------
Support the Patreon:   / tunerwithkids  
Merch Available: https://teespring.com/stores/tuner-wi...
Follow Me on IG:   / tuner_with_kids  
For questions and inquiries: [email protected]
-------------------------
#brembo #rebuildcaliper #brembocalipers

0:00 Intro and Seal Kits
2:40 Popping Pistons Out
5:45 After Powdercoat
6:20 Rebuild Kit Overview
8:00 Prepping Seal Races Threads
13:15 Seal and Boot Install
15:45 Piston Assembly
18:50 Finished Brembo Sticker

Disclaimer: "Tuner with Kids", the alias for the human content creator for this YouTube channel, is not responsible for any damages, injuries, losses, or liabilities associated with any repairs, upgrades, or maintenance performed on yours, or any elses, vehicle/property whatsoever. No warranty, express or implied, is made as to the accuracy or completeness of any information provided within this channel. Viewing and using the “as-is" information of this channel is totally at your own risk. Always wear personal protection equipment and follow appropriate vehicle manufacturer service manual guidelines with original manufacturer parts only when performing any repairs, upgrades, or maintenance upon any vehicle/property. Please note that some of the links provided are affiliate links and I may earn a commission if you purchase through the links. I use all of the products shown and recommend them because they are from companies I have found to be helpful and trustworthy. Please let me know via email if you have questions regarding any of the products/tools used.