How to Replace Blower Motor Resistor 2009-2014 Ford F-150

Buy Now!
New Blower Motor Resistor from 1AAuto.com https://trq.video/ia-MCHBR00002

This video shows you how to install a new blower motor resistor from TRQ on your 2009-2014 Ford F-150. The heat and air condition fan is controlled by a separate module, called the blower motor resistor. The nature of this component’s job causes it to heat up frequently, which can lead to failure. If your vents will only blow one speed, this is likely the cause. TRQ has a new resistor module made specifically for your vehicle.

This repair was done on a 2009 Ford F-150 Lariat 5.4L Crew Cab Pickup 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2009 Ford F-150
2010 Ford F-150
2011 Ford F-150
2012 Ford F-150
2013 Ford F-150
2014 Ford F-150

Tools you will need:
• 8mm Wrench https://trq.video/ohV-1AXAA00011
• 8mm Socket https://trq.video/obaX-1AXAA00017
• Ratchet https://trq.video/obAX-1AXAA00016
• Gloves https://trq.video/o7h-1AXSS00048
• Safety Glasses

Subscribe:    / @trq  

Check out our playlist:
Ford F150 2009-2014 12th Gen:    • Ford F150 2009-2014 12th Gen  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.