STEP by STEP: Chevy HHR & Cobalt front brakes & rotors

Replacing the front brake pads and rotors. This video should apply to mosts Chevy HHR and Cobalt vehicles but the concept is similar among most vehicles.

Due to shaking issues that I believe are the brake rotors loading up with pad material I have decided to switch to ceramic pads. I am using Autozone Duralast Gold C-Max pads which include a hardware kit, backing on the pads, and caliper pin grease packet.

The tools needed are pretty simple...
- Breaker bar (a large ratchet might work instead)
- 14 mm socket
- 15 mm socket
- 19 mm socket (for the lug nuts)

Optional, but helpful...
- Flat head screwdriver
- Hammer
- 15 mm wrench
- 14 mm wrench
- Torque wrench (to tighten to bolts to manufacturer specifications)

I'm using only basic hand tools and the jack that came with the car for reasons of demonstration. This is not a difficult task to perform.

I am not a professional mechanic, just a guy who works on his own cars at home. The procedures shown in this video may not be correct or safe, always consult a professional and follow manufacturers guidelines and specifications. Use common sense, only you are responsible for your own safety.

Basic Steps:
1. Raise and secure vehicle, remove wheel.
2. Remove the two 14mm caliper bolts, Remove caliper
3. Remove two 15mm caliper bracket bolts, remove bracket
4. Remove rotor, install new rotor
5. Reinstall caliper bracket & two 15mm bolts
6. Install new brake pads
7. Compress piston, reinstall caliper & two 14mm bolts
8. Reinstall wheel, pump brake pedal to seat piston