3 Ship models Royal William (1719); Warship; First rate; 100 guns | Relaxing classical music

3 Ship models Royal William (1719)

Model #1
Scale: 1:60. A Navy Board full hull model of the ‘Royal William’ (1719), a 100-gun three-decker ship of the line. The model is decked, equipped and rigged. This model, which is one of three full hull models of this vessel in the NMM collection, is probably a preliminary design as it differs from the completed vessel. It was re-rigged in 1925 in the Royal Naval Museum.

The ‘Royal William’ was an early 18th-century three-decker, one of six first rates in the class of the largest warships. It was 175 feet long, with a 50 feet beam and weighed 1918 tons burden. It was launched at Portsmouth in September 1719. It had a nominal complement of 800 men. It would have carried twenty-eight 32-pound guns on its gun deck, twenty-eight 24-pounders on its middle deck, twenty-eight 12-pounders on its upper deck, along with twelve 6-pounders on its quarterdeck and four on its forecastle.

The ‘Royal William’ was never fitted out for sea as a 100-gunner, however, and its active life began when it was reduced to a second rate of 84 guns in 1756. It saw service during the Seven Years War as part of Hawke’s fleet in 1757 and took part in the expedition to Quebec, and carried home the body of General James Wolfe in 1759. The ‘Royal William’ was reduced to a third rate of 80 guns in 1771. During the American Revolutionary War it was involved in the relief of Gibraltar, before becoming a receiving ship at Portsmouth in 1790 and, from 1801, a guardship at Sheerness. It was broken up in 1813.

The ‘Royal William’s’ longevity is sometimes ascribed to George III’s particular fondness for it. A more likely explanation is that it was constructed from charred winter-felled oak.


Model #2
Scale: 1:60. A Navy Board style model of the ‘Royal William’ (1719), a 100-gun, three-decker ship of the line. The model is decked and equipped.

This superb model, depicts the ship as built, and is among those that set the standard for later ship modellers. Typical of the first half of the 18th century, it shows the quality achieved by the model makers in this period. Plank on frame in construction, the ‘Royal William’ demonstrates a high standard of craftsmanship not only in its technical construction but also in the fittings and particularly the decoration. The model shows a particularly elaborate figurehead.

The ‘Royal William’ was an early 18th-century three-decker, one of six first rates in the class of the largest warships. It was 175 feet long, with a 50 feet beam and weighed 1918 tons burden. It was launched at Portsmouth in September 1719. It had a nominal complement of 800 men. It would have carried twenty-eight 32-pound guns on its gun deck, twenty-eight 24-pounders on its middle deck, twenty-eight 12-pounders on its upper deck, along with twelve 6-pounders on its quarterdeck and four on its forecastle.

The ‘Royal William’ was never fitted out for sea as a 100-gunner, however, and its active life began when it was reduced to a second rate of 84 guns in 1756. It saw service during the Seven Years War as part of Hawke’s fleet in 1757 and took part in the expedition to Quebec, and carried home the body of General James Wolfe in 1759. The ‘Royal William’ was reduced to a third rate of 80 guns in 1771. During the American Revolutionary War it was involved in the relief of Gibraltar, before becoming a receiving ship at Portsmouth in 1790 and, from 1801, a guardship at Sheerness. It was broken up in 1813.

The ‘Royal William’s’ longevity is sometimes ascribed to George III’s particular fondness for it. A more likely explanation is that it was constructed from charred winter-felled oak.

Model #3
Scale: 1:48. A contemporary full hull model of the Royal William (1719), a 100-gun three-decker ship of the line, built in the Georgian style. The model is decked and equipped and has been made to split along the main wales, revealing the interior layout and construction.

This model generally shows the ‘Royal William’ as built, although the side gangways in the waist linking the quarterdeck to the forecastle, were generally introduced in 1745. The carved and painted decoration on the model is of high quality, especially the figurehead, which represents William III in Roman dress on horseback, carrying a baton and trampling a snake-haired gorgon. On the taffrail, situated above the open stern galleries, is the bust of William III supported by a variety of figures from ancient mythology as well as a wealth of foliage and putti. William’s mongram ‘WR’ has been incorporated into balustrade on the open gallery of the grand cabin below.

National Maritime Museum, Greenwich, London.

Relaxing classical music:

Лицензия Creative Commons Attribution 4.0 на использование трека Egmont Overture (исполнитель: Kevin MacLeod): https://creativecommons.org/licenses/...

Источник: http://incompetech.com/music/royalty-...

Исполнитель: http://incompetech.com/