How to Replace Intake Manifold Gasket Set 2007-2013 Chevrolet Silverado 1500

Buy Now!
New Intake Manifold Gasket Set from 1AAuto.com http://1aau.to/if/1AEGS00322

This video shows you how to install a new intake manifold gasket in your 2007-2013 Chevrolet Silverado 1500.Gaskets help seal joints between components in places where you don’t want air, or fluids leaking out of that seal. Rubber or silicone gaskets may dry out or harden over time, reducing their effectiveness.

This process should be similar on the following vehicles:
2007 Chevrolet Silverado 1500
2008 Chevrolet Silverado 1500
2009 Chevrolet Silverado 1500
2010 Chevrolet Silverado 1500
2011 Chevrolet Silverado 1500
2012 Chevrolet Silverado 1500
2013 Chevrolet Silverado 1500

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/oa9R/1AXAA00013
• 10mm Shallow Socket
• 13mm Socket http://1aau.to/obdm/1AXAA00015
• 8mm Socket http://1aau.to/oaUV/1AXAA00017
• Trim Tool Set http://1aau.to/o2M/1AXXX00006
• 1/2 Inch Ratchet http://1aau.to/o7X/1AXAA00043
• 1/4 Inch Ratchet http://1aau.to/oaUV/1AXAA00017
• 3/8 Inch Drive Ratchet http://1aau.to/obdm/1AXAA00015
• Torque Wrench http://1aau.to/oas8/1AXAA00044
• Gloves http://1aau.to/oJe/1AXSS00048
• Safety Glasses http://1aau.to/oCM/1AXAA00343
• Pick http://1aau.to/oH2/1AXAA00037

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.