How To Replace Upper Control Arm 2003-2011 Mercury Grand Marquis

Buy Now!
New Control Arm with Ball Joint from 1AAuto.com https://trq.video/ib-1ASLF00797

This video shows you how to install an upper control arm on your 2003-2011 Mercury Grand Marquis. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear.

This repair was done on a 2009 Mercury Grand Marquis LS 4.6L Sedan 4-Door RWD Automatic and the process should be similar on the following vehicles:
2003 Mercury Grand Marquis
2004 Mercury Grand Marquis
2005 Mercury Grand Marquis
2006 Mercury Grand Marquis
2007 Mercury Grand Marquis
2008 Mercury Grand Marquis
2009 Mercury Grand Marquis
2010 Mercury Grand Marquis
2011 Mercury Grand Marquis

Tools you will need:
• Flat Blade Screwdriver https://trq.video/oa8X-1AXAA00013
• 13mm Socket https://trq.video/obbJ-1AXAA00015
• 15mm Socket https://trq.video/obbJ-1AXAA00015
• 18mm Socket
• 21mm Socket
• 24mm Socket
• 8mm Socket https://trq.video/oaTx-1AXAA00017
• Trim Tool Set https://trq.video/oZF-1AXXX00006
• Locking Pliers https://trq.video/ojr-1AXAA00139
• Needle nose pliers https://trq.video/ozq-1AXAA00051
• Needle nose pliers https://trq.video/ozq-1AXAA00052
• Torque Wrench https://trq.video/oarW-1AXAA00044
• Copper Anti-Seize
• Gloves https://trq.video/oHB-1AXSS00048
• Safety Glasses
• Floor Jack https://trq.video/oUi-1AXAA00068
• Hammer
• Pole Jack
• Punch
• Rubber Mallet
• Wheel Chocks

Subscribe:    / @trq  

Check out our playlist:
Mercury Grand Marquis 5th Generation 2003-2011:    • Mercury Grand Marquis 5th Generation ...  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.