Ford - Fiesta (Mk4) - Service Training (1996)

Ford - Fiesta (Mk4) - Service Training (1996)

FORD FIESTA '96 (CG_7591/V)

Programme Index

The time codes quoted below correspond to the clock reference in the top right of the programme picture.

00:00 Section 1 - INTRODUCING FIESTA '96

00:30 Fiesta evolution

02:28 Fiesta '96 engine range

04:45 Fiesta '96 transmissions

08:23 Fiesta '96 suspension

09:39 Fiesta '96 steering

10:29 Fiesta '96 brake system

13:44 Fiesta '96 safety

15:30 Fiesta '96 security

16:43 Fiesta '96 electrics

18:45 Fiesta '96 environment

20:01 Section 2 - FIESTA '96 ENGINE RANGE FEATURES

20:05 The engine range

20:18 The Endura-E 1.3 litre

21:34 The Endura-DE 1.8 litre

22:32 The Zetec-SE 1.25 / 1.4 litre

26:16 Fiesta electronic engine management

26:32 Diagnosis with FDS 2000

27:03 Section 3 - DISMANTLING THE ZETEC-SE 1.25

27:07 Important working practices

27:50 Removing the Poly-V belt

28:15 Accessing the timing belt

28:28 Removing the water pump

28:51 Removing the crank vibration damper

29:37 Releasing the hydraulic tensioner

30:07 Removing the timing belt/tensioner

30:17 Other belt drive components

30:33 Front engine oil seal removal/replacement

31:20 Accessing the spark plugs/camshafts

31:37 Camshaft gear removal

31:54 Camshaft oil seal removal replacement

32:32 Removing camshaft bearing caps

33:20 Camshaft identification

33:42 Bucket tappets

34:02 Cylinder head removal

34:30 Cylinder head gaskets

34:49 Rear engine oil seal removal/replacement

35:12 Piston removal/replacement

35:45 Crankshaft main bearing/block design

36:28 Section 4 - ASSEMBLING THE ZETEC-SE 1.25

36:43 Assembling the sump gasket/sump

37:35 Assembling the flywheel

37:53 Cylinder head assembly... crankshaft setting

38:05 Assembling the cylinder head

38:19 Assembling the tappets/camshafts

39:34 Setting camshafts to TDC position

39:50 Crankshaft alignment peg

40:16 Assembling the timing belt

42:29 Confirming engine timing

43:40 Re-timing the engine

44:32 Engine cover gasket/bolt grommets

45:24 Section 5 - ZETEC-SE ELECTRONIC ENGINE MANAGEMENT

45:39 EEC V module

46:00 Engine management sensors

47:45 Engine management actuators

48:30 EEC V re-programming