How to Build P5G | Proto5 Gauntlet | Bespoke FPV Drone Tank Frame

Thanks for watching guys, if you enjoyed the video, please like and subscribe and leave a comment. Hope you enjoy P5G as much as I do. If you have any questions, feel free to email me at [email protected]
---
SHOP
P5G https://www.protofpv.com/product-page...
P5G Core https://www.protofpv.com/product-page...
---
GUIDES, PRINTS, TUNES
Assembly Guide https://drive.google.com/file/d/1OfDI...
3D Print STL Files (Not for commercial use)
https://drive.google.com/drive/folder...
PID & Filter Tune
https://drive.google.com/file/d/1qqEd...
BL_Heli32 settings (32 bit)
https://drive.google.com/file/d/1ujvw...
Blue Jay ESC settings (8bit)
https://drive.google.com/drive/u/0/fo...
How to Use Protostrap
   • How To Use Protostrap | 3D Printed Ba...  
*Reverse Prop Direction Recommended!

WARNING: PID and filter tune was tested only with the recommended parts list provided. The tune may not be suitable for your build and may cause fly aways upon arming! Check over all components, solder connections, and settings before your first flight, always do a test arm and low hover (less than 1 meter off the floor) to ensure no fly aways occur. We are not responsible for the loss or damage of your quad!
---
This frame has only been tested and tuned with the highest quality components

RECOMMENDED PARTS w/affiliate links
Motors: 2207+ ~ 2306+ ~ 2307+ 1750kv ~ 1950kv
Power: 6S Lipo 1100mah ~ 1500mah 70C ~150C XT60 w/12 AWG wire
Please note, the protostrap M only fits up to 1500mah lipos.
Tested with:
STACK: SpeedyBee F405 V4 55A https://www.speedybee.com/speedybee-f...
AIO: Flywoo 45A 32 bit AIO https://flywoo.net/products/goku-gn74...
Alternative: Use at minimum any 45A full or mini stack or AIO with plug and play VTX port for quick servicing
32 bit recommended
CAPACITOR: Solder Directly + - Pads 35 ~ 50v 1000uF
Props: The highest quality freestyle prop 5.1"
VTX: DJI O3 AU / Universal http://tinyurl.com/42w5fryd
O3 VTX ANTENNA: Flywoo 5.8G Light Antenna for Flylens 75/85 https://flywoo.net/products/flywoo-5-...
or any standard antenna with 3-4mm post
Receiver: TBS w/Immortal T V2 or ELRS w/RP1/2
Buzzer: Vifly Finder Mini https://viflydrone.com/products/vifly...
Build Target Weight Range: 380g ~ 430g (no battery)
---
Notes:
-Sorry forgot to weigh it...The drone all assembled as shown in the video DJI O3 AU and full size 55A 30x30 stack w/phat and heavy aluminum heat sink, buzzer, with no lipo is around 443g. Imagine you use AIO, a lighter VTX, and less prints. It's gonna be a very lightweight tank.
-All freestyle video shown is with No stabilization
-Ignore my ugly build XD. It's a prototype thats been hacked together and crash multiple times and improved upon. I know you can build it better!
-Sorry about my shaky fingers. I know it's creepy. Maybe I had too much coffee or I have nerve damage. LOL
---
#best #fpv #drone #frame #2024 #2025 #2026
---
0:00 Intro
2:34 Features
4:57 Build Begins
5:38 RX Antenna Holder Feature
6:57 Stack and Motors I Use
7:54 Feet, Motors, LED light
9:42 Motor Wire Laces
11:12 Camera Cage Assembly
13:28 VTX Dual Antenna Holder
14:40 O3 AU Quick Swap Holder
16:09 Lipo Placement Tips
17:04 Top Plate Assembly Install
18:00 Tessegrip Placement
19:09 Test for Magic Smoke and Setup in Betaflight
---