Скачать или смотреть New Wing - SoarKraft 1.2M with MH32 airfoil and 2 servos - simple, light and good lift

This video is about 3D Printing, Building and Flying the 2 Servo MH32 1.2 meter wing from SoarKraft that can be used on any of the fuselage designs. The MH32 airfoil is higher lift, but not as fast as the RG15 airfoil and a good match with the power pod, easier to program. We have done other wing builds, but this will use LW-PLA and build a light but strong two piece wing for power flight, slope or bungee launch, without spending too much on fancy light weight parts.

More information available at:
https://soarkraft.com/

Models flown:
Park flier:
Power Pod on Roughgen using the 2 servo MH32 wing and the single servo tail.
Airfoil: MH32
Wingspan: 1.2M (49")
Flying weight ~ 440g (15.5 oz) with Bambu Aero LW-PLA printed on an X1C
fuse build video -    • Light Weight Power Pod - Build n Fly - Soa...  

On the slope and bungee:
Pika using the 2 servo MH32 wing and the single servo tail.
Airfoil: MH32
Wingspan: 1.2M (49")
Flying weight ~ 380g (13.4 oz) with Bambu Aero LW-PLA printed on an X1C
build videos -    • LW-PLA Pika from SoarKraft - 13oz RTF - bu...  

Parts used for the wing:
Carbon (pultruded carbon):
qty 1 - 7mm x 1000mm tube or rod spar
qty 2 - 1mm x 4mm x 1000mm (or qty 5 - 1 x 4 x 500mm if 1000mm not available)
optional
Available from:
Wind Catch RC: https://windcatcherrc.com/product-cat...
Aloft Hobbies: https://alofthobbies.com/collections/...

qty 2 - 9g servos
qty 2 - EZ connectors
qty 1 - .047 music wire x ~ 8" for aileron pushrod

Printer filament or others below
Bambu Lab Aero PLA - https://us.store.bambulab.com/product...

This video shows using the Orca Slicer and any 3D printer to print light weight designed airplane parts to build a flyable radio controlled glider. Our designs and our CAD modeling is different from other files available, but the same ideas apply. Use our settings to get good results.

Additional tools Used in this video:
4" file set: https://amzn.to/3lb3vmV
5.5" file set: https://amzn.to/3lhT6G7 or https://amzn.to/3QblF8g
Z-Bender: https://amzn.to/2X2r493
Round File for 6mm Spar Hole: https://amzn.to/3jdMPKC then click one of the other options

Find test parts and slicer config files and settings here:
https://soarkraft.com/pages/how-to-an...

Thanks for watching - please support the channel by liking / subscribing.
If you really want to help please buy the 3D printing files for these parts.
Or click on the material links below.
I am not sponsored by any of them, but I do get a Amazon Associate link credit if you buy them... however I do have a love / hate of Amazon, and the link is more to show you what the material is and this credit is hardly worth pushing, buy from whoever you want.

Prusa Slicer - https://www.prusa3d.com/page/prusasli...
Bambu Studio - https://bambulab.com/en/download/studio
Orca Slicer - https://github.com/SoftFever/OrcaSlicer
Cura Slicer - https://ultimaker.com/software/ultima...
Simplify3D Slicer - https://www.simplify3d.com/software/f...

PLA - https://amzn.to/3CDjGlH
eSun Foaming LW-PLA - https://amzn.to/3ScKrTE may be out of stock
ColorFabb LW-PLA - https://store.flitetest.com/colorfabb...
Bambu Lab Aero PLA - https://us.store.bambulab.com/product...
SainSmart LW-PLA - not available yet????
Polymaker LW-PLA - https://amzn.to/3TyeSoF


00:00 Intro
01:02 New Wing Details
02:42 Print and Build
07:10 Hinges
09:27 Servos and Pushrods
13:20 Test Flights

#prusaslicer
#3dprinted
#rcairplane
#bambulab
#orcaslicer
#rcglider
#rclife