How to Replace Front Lower Control Arm 2015-2020 Cadillac Escalade

Описание к видео How to Replace Front Lower Control Arm 2015-2020 Cadillac Escalade

Buy Now!
New Control Arm with Ball Joint from 1AAuto.com http://1aau.to/ia/1ASLF00969

This video shows you how to install a new quality TRQ lower control arm with ball joint in your 2015-2020 Cadillac Escalade. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear.

This process should be similar on the following vehicles:
2015 Cadillac Escalade
2016 Cadillac Escalade
2017 Cadillac Escalade
2018 Cadillac Escalade
2019 Cadillac Escalade
2020 Cadillac Escalade

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/obob/1AXAA00013
• Pry Bar http://1aau.to/oVI/1AXAA00020
• 15mm Wrench http://1aau.to/oXQ/1AXAA00010
• 10mm Socket http://1aau.to/obfK/1AXAA00017
• 15mm Socket http://1aau.to/obz2/1AXAA00015
• 18mm Socket http://1aau.to/oaka/1AXAA00043
• 22mm Socket http://1aau.to/oo3/1AXAA00266
• 35mm Socket http://1aau.to/oau/1AAST00005
• Dead Blow Hammer http://1aau.to/oVD/1AXAA00091
• Trim Tool Set http://1aau.to/oaeT/1AXXX00006
• 1/2 Inch Impact Gun http://1aau.to/ot4/1AXAA00252
• 15/16 Inch Socket
• 3/8 Inch Drive Ratchet http://1aau.to/obz2/1AXAA00015
• Torque Wrench http://1aau.to/oaJa/1AXAA00044
• Gloves http://1aau.to/oafs/1AXSS00048
• Safety Glasses http://1aau.to/o8n/1AXAA00343
• Brass Punch
• Floor Jack http://1aau.to/o8J/1AXAA00068
• Hammer http://1aau.to/oVD/1AXAA00091
• Jack Stands http://1aau.to/oWb/1AXAA00065
• Wheel Chocks

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Комментарии

Информация по комментариям в разработке