Скачать или смотреть Establish SIC Checkpoint Firewall validate SIC expiration and Reset Sic Connection r80.10 80.40

For Open Servers and other appliances, perform this procedure on the Security Gateway:

Procedure
1 Connect to the command line on the Security Gateway / Cluster member (over SSH, or console).
2 Go to the Check Point menu: [Expert@HostName]# cpconfig.
3 Choose option 5 "Secure Internal Communication" from the menu by typing number 5 and pressing "Enter":
4 You will be asked if you wish to re-initialize the communication. Press on "y" and then press "Enter":
5 You will be asked again if you want to reinitialize the communication, Press on "y" and then press "Enter":
6 You will be prompted to enter the new "SIC" key. Make sure to enter the same key in both fields. Once done typing, press "Enter":
7 The key will be reinitialized, wait until you see the key was "successfully initialized". Once done choose the option "Exit" and press "Enter":
8 The Check Point processes will be restarted. This will take a few minutes. Once completed, you will be returned to the command line. This ends the process on the Security Gateway side: