How to install a 2017-2018 Hyundai Elantra rear bumper cover

Who doesn't love this reliable and dependent sedan. We want you to be safe and look good doing it. Let us show you how to install this rear bumper!

Where To Purchase: http://bit.ly/elantrabumpers

Source: https://www.revemoto.com


0:00 Start
0:50 Tools needed
1:06 Unplug the wire harness/connectors
1:17 Remove the bolts
2:13 Push the grommet out
2:26 Remove the tail light (this can be very hard, we took it off just like you saw but off-camera)
2:46 Remove the bolt under the tail light (the customer had their bumper ripped off)
2:57 Mount the rear bumper
3:32 Secure the bumper with the inner bolts
4:33 Insert the bolts and clip in the tail light section
6:00 Secure the bumper to the fender liner
13:20 Outro

Learning how to install a rear bumper can look daunting but it is a very simple process. Let us show you how with our in-house marketer doing a bumper cover replacement for the first time.

Subscribe: https://www.youtube.com/c/Revemoto?su...

Our customer had her bumper knocked off in an accident and had to toss it out. We did not remove the bumper but she still had the clips and screws in a place where the bumper was ripped off. If you are looking to learn how to remove a rear bumper cover, work your way from the end of the video to the beginning. In order to take off this rear bumper, you do have to remove the taillights as well. A very easy thing to do!

Under the taillights are two plastic pins and one 10mm bolt. For the taillights, there are two bolts and the electrical wire you have to disconnect. After you have removed, the taillights, the bumper has a few bolts and plastic push pins. A large portion of screws and plastic push pins would be along with the wheel well attaching the fender liner to the car. Once these are removed, their plastic clips should be exposed underneath the tail light.
We did not have to remove the rear bumper but if we did, there would be a small number of bolts holding the bottom of the bumper to the bottom frame of the car. Look underneath the rear bumper for those several bolts and, or plastic clips.

Follow Us on
FB:   / revemoto  
IG:   / revemoto  
Twitter: https://twitter.com/revemoto?lang=en

________________________________________________________
#HyundaiElantra #Hyundai #paintedautoparts #Elantra #highquality #DIY #HowTo #revemoto

DISCLAIMER: While ReveMoto tries to make the information in this video as accurate as possible, we make no claims, promises, or guarantees about the accuracy, completeness, or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself (DIY) projects entail some risk. It is the sole responsibility of the viewer to assume this risk. ReveMoto is not responsible or liable for any loss, damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.