Jeep Wrangler TJ - Evaporator Core and Heater Core Replacement **

In this video I will show you the tips and tricks I used to replace both the Evaporator Core - https://amzn.to/3Jzq2WV and Heater Core - https://amzn.to/3QbvYJJ. This replacement is applicable to 1997 - 2006 Jeep Wrangler TJ models. In my opinion this repair wasn't near as bad as I thought it was going to be. Removal of the entire HVAC Box is required.


Parts and Tools used in the video -
Evaporator Core: https://amzn.to/3Jzq2WV
Heater Core: https://amzn.to/3QbvYJJ
A/C O-Ring Kit: https://amzn.to/3Upe3le
A/C Line Disconnect Tool: https://amzn.to/3U9Qifz
A/C Accumulator: https://amzn.to/3W8bC7Z
Hose Clamping Tool: https://amzn.to/3Qe287k
Spring Hose Clamp Tool: https://amzn.to/4b164jG
Hose Removal Tools: https://amzn.to/4aJ1SVZ
Torx Bit T27: https://amzn.to/3UbunV8
Dash/Trim Pry Tool: https://amzn.to/44geule
Rubberized Undercoating Spray: https://amzn.to/49QQlme



Warning: On vehicles equipped with air bags, disable the air bag system before attempting any steering wheel, steering column, or instrument panel component diagnosis or service. Disconnect and isolate the battery (ground) cable, then wait two minutes for the air bag system capacitor to discharge before performing further diagnosis or service. This is the only sure way to disable the air bag system. failure to take the proper precautions could result in accidental air bag deployment and possible personal injury.


Auto Repair Source - https://www.FreeAutoMechanic.com/
Engine Cooling System - https://www.freeautomechanic.com/cool...




















As an Amazon Associate I earn from qualifying purchases.