Omron CP1H PLC Numbering Systems and Addressing

We will now look at the Omron numbering systems and addressing in the CP1H PLC.
The Omron CP1H series of programmable logic controllers have a fixed input and output addressing system. Every PLC has its own way of addressing its inputs and outputs. We will be looking at how the CP1H series of controller addresses its inputs and outputs. Numbering systems used in this controller will also be looked at as well as addressing. Addressing can be direct or indirect. We will look at how this can be accomplished using examples in the CP1H controller.

More information can be obtained on our website. This includes all of the links mentioned in this video.
https://accautomation.ca/omron-cp1h-n...

00:00 Omron numbering systems
00:35 Omron IO addressing
01:10 Omron memory area
03:25 Hardware monitor areas
05:48 Online monitor areas
11:25 Indirect move addressing

Previously in this Omron CP1H series, we looked at the following:
System Hardware
https://accautomation.ca/omron-cp1h-s...
CX-Programmer
https://accautomation.ca/omron-cp1h-c...
Establish Communication
https://accautomation.ca/omron-cp1h-e...
Omron CP1H Setting, Forcing and Online Editing
https://accautomation.ca/omron-cp1h-s...

There are several reasons why we are using the Omron CP1H Controller. Here are just a few.
Standalone PLC with built-in I/O
Communication ability - Ethernet Port, RS232, RS485 - support for protocols such as Modbus, Host Link, ASCII (No Protocol)
Built-in Analog inputs and outputs
4 axis control of motion
4 high-speed counters
powerful instruction set (similar to CS and CJ series)
Ability to expand the system with a variety of modules

The Omron CP1 series of programmable logic controllers consists of three different units. CP1E is the cost-effective unit, CP1L is the high performing controller that can come with embedded Ethernet and the CP1H is the position control and comprehensive programmable logic controller.
We will be looking a the CP1H for this series, but a majority of the information can be applied to the CP1E and the CP1L controllers as well.

https://www.accautomation.ca