Скачать или смотреть Black and Decker Cordless Trimmer/Edger 20v (LSTE525) Worn/Broken Switch Repair Demonstration

o This demonstration includes the following: 1) How I diagnosed and repaired the worn switch on my Black and Decker Cordless Trimmer/Edger 20v (LSTE525). 2) The problem was that the worn switch caused the trimmer not to turn on. 3) The repair tools and materials that I used to repair my Black and Decker Cordless Trimmer/Edger 20v (LSTE525). 4) How I disassembled my Black and Decker Cordless Trimmer/Edger 20v (LSTE525) for diagnosis and repairs.

o The materials and tools that I used for this demonstration are: 1 x Impact Driver, 1 x 15 torx bit, 1 x bit extension, 1 x utility knife, 1 x pair of scissors, 1 x 3M Auto Advanced Molding Tape, and 1 x container for screws.

o Warning: Be careful if you are using an Impact Driver or a Power Tool because some of the plastic screw mounting holes are easy to damage.

o Thanks for watching and please leave a like 👍👍👍 and subscribe ✅🆗✅👌🔔to show support for future demonstrations and videos if you found this demonstration to be useful and/or helpful.

o This demonstration is divided into the following time stamped chapters:

00:00 Introduction

00:04 Disclaimer

00:08 Problem

01:04 Diagnosis and Repair

02:48 Equipment

03:24 Warning

03:37 Disassemble Steps