How to Replace Neutral Safety Switch 2001-2005 Ford Explorer Sport Trac

Buy Now!
New Neutral Safety Switch from 1AAuto.com https://trq.video/ic-1AZNS00012

This video shows you how to install a neutral safety switch on your 2001-2005 Ford Explorer Sport Trac. The neutral safety switch is a safety device that does not let your vehicle's engine start unless the transmission is in neutral. If the switch is malfunctioning, or failed, you may not be able to start your vehicle!

This repair was done on a 2005 Ford Explorer Sport Trac XLT 4.0L Crew Cab Pickup 4-Door RWD Automatic and the process should be similar on the following vehicles:
2001 Ford Explorer Sport Trac
2002 Ford Explorer Sport Trac
2003 Ford Explorer Sport Trac
2004 Ford Explorer Sport Trac
2005 Ford Explorer Sport Trac

Tools you will need:
• Flat Blade Screwdriver https://trq.video/oaIw-1AXAA00013
• Pry Bar https://trq.video/oBJ-1AXAA00020
• 21mm wrench
• 18mm Socket
• Pliers
• Torque Wrench https://trq.video/o7J-1AXAA00044
• Dielectric Grease
• Hammer

Subscribe:    / @trq  

Check out our playlist:
Ford Explorer Sport Trac 1st Generation 2001-2005:    • Ford Explorer Sport Trac 1st Generati...  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.