1997 Chrysler Grand Voyager 2 Button Key Fob Programming

Working Remote not required!

Confirmed on 95, 97 & 99 Chrysler Town & Country / 94 Eagle Vision /96 Concord, 2- '97 Intrepids

1.Remove the upper dash panel to reveal the RKE
Module
2. Unscrew the RKE module
3. Find the GROUND & PROGRAM ENABLE
WIRES.
4.With Keyless Entry Remote(s) in hand Close ALL
Doors insuring alarm is DISABLED (if appl.).

5. Take a clip or cable and attach one side to ground wire .

6. Turn the ignition to ON position.

7. Attach other side of the cable to program enable wire.

8. Press the unlock button on ANY
REMOTE . (You will hear a chime)

9. Press unlock Button on the next remote. This is
#2 (You will hear a chime)
10. Press unlock button on additional remotes (IF
NEEDED) (you will hear a chime)
11. When finished Turn the Ignition Key OFF
12. Remove the GROUND from the RKE Module's
PROGRAM ENABLE Wire
13. Test each remote to see if it works,