etrailer | Redarc Industrial Pure Sine Wave Inverter Spec Review

Click for more info and reviews of this Redarc RV Power Inverter:
https://www.etrailer.com/RV-Power-Inv...
Check out some similar RV Power Inverter options:
https://www.etrailer.com/dept-pg-RV_P...

https://www.etrailer.com
Don’t forget to subscribe!
   / etrailertv  

Full transcript: https://www.etrailer.com/tv-Demo-Reda...
Hello, everybody. This is Jeff at etrailer.com. Today, I'm gonna take a look at this REDARC 12-volt 2,000 watt industrial pure sine wave inverter. Now this 2,000 watt industrial inverter provides AC power for your electronics and appliances. Basically, it'll use 12-volt DC power that's coming from RV's battery bank, and this inverter will change that DC output from RV batteries into AC power so that you can plug in tools and appliances. Does use the pure sine wave technology, which will replicate your household AC power.

So it allows you to run devices safely. It's perfect for use with sensitive electronics like HDTVs and computers. Now it does use multiple connection points that'll let you secure cables and external devices to your inverter. I do wanna zoom in and go over both ends or panels. So if we go to the front panel, which is right here, you can see they do offer a main switch right over here, that'll control it.

And then down here, you'll see the two GFCI AC outlets. And then right over here, you can see there's three LED indicator lights. Those LED indicators will show input voltage level, output load level, and fault conditions. Now the rear panel, if we go to the other end, on that side, you'll notice that has the two DC input terminals right here, has the chassis ground right down here at the bottom. And then up at the top here is a remote port.

They do offer a flush mount remote that'll let you monitor and control this inverter inside your RV. That remote we do sell separately on our website. It's listed on this product page as a related product and it is part number RED95RR. Just wanna pop up an insert to show you that's what that remote would look like with the cable. And, again, we sell that separately.

Now, the LED indicator lights, we have mentioned, right over here. They do show the input voltage level, the output load level and the fault conditions. Now it does also come with the DC cable connectors right here, there's two of those. These two of the DC input plastic covers, a black and a red one. Nice owner's manual to describe how it all hooks up and how it operates. Now this does offer built-in safety features to protect your RV's electrical system. We do also offer a fuse block installation kit that'll let you safely connect this inverter to your RV battery. And, again, it's not included. It is listed on this product page. This is compatible with the REDARC RedVision vehicle management system, part number RED89FR. A few specs on this, the application is for 12-volt battery systems. The rated power, when it's running, the rated power output is 2,000 watts. The starting or surge power output is 3,500 watts. Voltage on this, maximum power is 12 volts DC. Input is 10.5 to 16.5 volts DC, and the output is 100 to 120 volts AC. Does have a temperature range of operating range of a negative four degrees Fahrenheit to 104 degrees Fahrenheit and a storage range of a negative 22 degrees Fahrenheit to 150 degrees Fahrenheit. Few dimensions on this, the overall length from one end to the other is gonna be right at 17 and 7/16 inches long. The width on it, including the mounting flanges at the bottom, is 9 and 3/4 inches wide. And your overall height on this unit is right at 3 and 1/4 inches tall. The weight of it is about 11 and 1/2 pounds. But that should do it for the review on this REDARC 12-volt 2,000 watt industrial pure sine wave inverter.