Скачать или смотреть FreeCAD Pad & Pocket: Modes That Speed Up Modeling

FreeCAD Tutorial for Beginners 2026:    • FreeCAD Tutorial 2026: 3D Modeling for Beg...  

Master Parameters & Formulas – Stop redrawing models from scratch! Learn to build smart designs that change instantly: https://learn3dcad.com/freecad-mini-c...

Design a Phone Stand (Step-by-Step) – A complete project from zero to 3D print. Perfect for beginners: https://learn3dcad.com/freecad-course...

Why get these? No ads. Clear path to success. Download instantly and keep forever.

MY CAD & 3D PRINTING GEAR (Affiliate Links):
(Disclaimer: As an Amazon Associate I earn from qualifying purchases.)
Workstation & Accessories:
• Workstation: https://amzn.to/4iRDhTN
• Mouse: https://amzn.to/3YlemP2
• Keyboard: https://amzn.to/3KPVxAq
3D Printing:
• Reliable Filament: https://amzn.to/4pWLs3t
Essential Tools:
• Digital Caliper (Budget option): https://amzn.to/4rQsyNq

In this lesson, we go back to the fundamentals and take a closer look at the Pad and Pocket operations in FreeCAD. These are the two most frequently used tools when building 3D models in Part Design, and they can do much more than a simple extrusion or cut.

You’ll learn how the Pad operation can be created not only as a basic one-sided extrusion but also as Two-sided and Symmetric. We also cover the most practical pad types, such as Up to face, To first, and To last, including the Offset to face option for fine control.

Next, we do the same for the Pocket operation: standard depth pockets, Through all, Up to face, To first, and symmetrical/two-sided pockets. We also discuss an important practical detail: Through all can affect multiple solids if you allow multiple solids inside one Body - so in many cases, Up to face is the safer and more predictable option.

Finally, I show how to use the Taper angle in both Pad and Pocket operations to create draft angles - either widening or narrowing the walls depending on the angle sign.