Barrel corrugated tile forming machine Horizontal corrugated roofing tile machine roof sheet machine

1.Transverse barrel corrugating type.
2.Raw material: thin Galvanized steel sheets, Aluzinc steel sheets etc
3.Sheet width:762mm(2.5 feet),914mm(3 feet),1000mm,1250mm
4.Width deviation:+25mm,-10mm.
5.Sheet Maximum length:3000mm or 4000mm,
Thickness: 0.13mm to 0.40mm
6.Pitch:76 mm(+/-1.0mm) or customer(s) required.
7.Depth:18mm(+/-0.5mm) or customer(s) required.
8.Corrugation:large round wave (Based on JIS G3316).
9.Drive:geared motor 7.5Kw with reducer X one(1).
10.Roll revolution:max 12/minute.
11.Guider for sheet input:welded steel structure with stopper for setting width.
12.Corrugation roll:barrel length 2000mm-3000(4000)mmL.
13.Pitch adjust roll:barrel length 2000mm-3000(4000)mmL.
14.Up & down device for corrugation and pitch adjusting rolls.
15.Screw X four(4),adjusted by manual handles.
16.Guider for output products:welded steel plates.
17.Control and op panel:relay type X one(1).
18.Hardness:full hard,semi hard,soft.