Скачать или смотреть roof tile | sader tiles hisab | roof tile calculation | roof tile estimator | construction details

roof tile | slate roof tiles | roof tile calculation | roof tile estimator | roof tile calculator
roof tile
sader tiles hisab
slate roof tiles
tile roof repair near me
roof tile calculation
roof tile estimator calculator
roof tile estimator
roof tile calculator
tile roof cost calculator
marley roof tile calculator
roof tile estimator calculator
tile estimate
calculate square feet for tile
estimate for tile floor installation
calculate tiles needed
tile flooring estimate
calculate floor tile
figure square footage for tile
calculating backsplash tile
calculate shower tile
sq ft how to calculate
how to calculate area in square feet
how to calculate square feet in flats
one square feet size
roof tiles installation
roofing tiles
slate roof repair
square feet measurements
Measure Your Roof: You'll need the length and width of your roof in meters.
Determine the Pitch: The angle or slope of your roof.
Tile Size: The length and width of one roof tile in meters.
Calculate the Area: Multiply the length and width of your roof to get the total area.
Calculate the Number of Tiles: Divide the total roof area by the area of one tile. Don't forget to account for wastage and overlap
Calculate the Area of the Roof
You need to determine the total square footage or square meters of the roof. For a simple rectangular roof:
Formula for area of a rectangle:
Area=Length×Width
For a roof with multiple sections, calculate the area for each section separately and then add them together.
Determine the Size of the Roof Tile
You need to know the dimensions of the roofing tiles you're using. For example:
Typical roof tile size: 12 inches x 16 inches (1 square foot per tile)
If the tile size differs, you'll need to calculate the coverage area of each tile.
To calculate the coverage area of a tile, use this formula:
Tile Area=Tile Length ×Tile Width
For example, if you have a tile that is 12 inches long and 16 inches wide:
Tile Area=12 inches ×16 inches =192 square inches = 0.133 square feet
Calculate the Number of Tiles Required
To find out how many tiles you'll need, divide the total roof area by the area of one tile.
Formula:
Number of Tiles = Total Roof Area/Area of One Tile
For example, if the total roof area is 1000 square feet, and each tile covers 0.133 square feet:
Number of Tiles =1000 sq ft/0.133 sq ft/tile =7,519 tiles
Account for Wastage and Cuts
Add an extra 5-10% to account for tile breakage, wastage, and the need for cutting tiles at the edges of the roof. This will ensure you have enough tiles to cover the entire area.
Pitch Factor Example:
A 4/12 pitch increases the roof area by about 1.1 times, a 6/12 pitch by about 1.2 times, etc.
Example Calculation
Let's say:
The roof is 30 feet long and 40 feet wide (1200 square feet total).
You are using 12" x 16" tiles (0.133 sq ft/tile).
You want to add 10% extra for waste.
Step-by-Step Calculation:
Roof Area = 30 ft × 40 ft = 1200 sq ft
Tile Area = 12" × 16" = 192 sq inches = 0.133 sq ft
Number of Tiles = 1200 sq ft ÷ 0.133 sq ft/tile ≈ 9,002 tiles
Waste Adjustment = 9,002 tiles × 1.10 = 9,902 tiles
Final Estimate:
You would need approximately 9,902 tiles to cover a 1200 sq ft roof, accounting for waste.
This is a basic method, and you may need to adjust based on roof complexity, pitch, and specific tile dimensions.

----------------------------------------------------------------------------------------------------
#constructiondetails
#construction_details
#rooftile
#rooftiles

---------------------------------------------------------------------------------------------------
For Business information: [email protected]

Facebook Page:   / constructiondetails7172  

YouTube Channel:    / @constructiondetails