How to Install Inside Mount Woven Wood Shades

Shop Woven Wood Shades here! http://blnds.cm/2a6wyFM
Woven Wood shades are easy to install, in this short video you will learn to install them. A screwdriver is all that's needed to install your blinds; or for an easier installation you can use a cordless screwdriver or a drill with a ¼" Hex head bit. Before starting, carefully unpack your blinds and mounting hardware. To familiarize yourself with the contents of your box, check the printed instructions included with your product. Begin your installation by positioning your mounting brackets 1 1/2" in from each side of your window along the top of the window opening. Position your brackets so that they are aligned evenly at to your desired mounting depth. Some prefer to mount their shades flush with the front of the window opening while others prefer to mount their shades closer to the window. Lightly tap starter holes with a hammer and fasten the supplied screws for each bracket. Line up your bracket with the slots on the top of your shade. Push the headrail up onto the brackets so that the threaded posts on the brackets fit through the slots in the headrail. Lift up the valance and secure your shade using the enclosed wingnuts. Turn the wingnut clockwise until it is snug. Repeat on the right. Finish by lowering and testing your new shade. To lower your shade, pull the cord toward the center of your shade and slowly raise your hand while holding onto the cord. To raise your shades, pull the lift cord away from your shade at any angle. And that's it, if you still have any questions about the installation of your blinds just give us a call, it's that easy.