Скачать или смотреть Ender 3 V2 firmware Update: Mriscoc Professional Firmware Installation || In Telugu ||

Telegram Link : https://t.me/techjournaldeals
Instagram link :   / techjournalwithmk  

Mriscoc Firmware Page : https://github.com/mriscoc/Ender3V2S1...

Ender 3 v2 Product link
https://amzn.to/46Yvax2

How to install the firmware:
*Manual installation for Ender3 V2 and S1 with STM32F1 SoC
*Insert a blank and MBR, FAT32 and 4096 allocation unit formatted µSD in your PC/Mac
*Copy the .bin file to the root of the card
*Ensure that the name of the file was not previously used to update the printer. If necessary, rename the file.
*Turn off the printer, disconnect any USB cable and insert the µSD card.
*Turn on the printer, the upgrade firmware process will start automatically.
*The display will be blank until the upgrade is finished (about 15 seconds).
*If you are upgrading from the original firmware or other fork, please restore defaults.
*Make the MPC/PID adjust and put the other calibration parameters

How to install Display Firmware:
**Get an µSD card of 8GB or less.
**Format the µSD card MBR, FAT32 and with a 4 KB sector size
**Copy the DWIN_SET(DWIN), private(DACAI) or TJC_SET (TJC) folder in the Root of SD
**Turn off your printer
**Disconnect and disassembly the screen unit
**Install the µSD card into the slot of the screen unit
**Reconnect the screen to the printer
**Turn on the printer and wait for the display to change color from blue to orange
**Verify that the screen assets were updated
**Turn off the printer and remove the µSD card from the screen unit
**Reassembly the screen unit
**If you weren't able to update the display, verify the format of the µSD Card (MBR, FAT32 and allocation unit of 4096 bytes) and the CRC of the files.
**Be sure to leave only the DWIN_SET or private folder at the root of the card.


#3dprinter #ender2v2firmware #mriscocfirmware #subscribe #trending