Guide to fix Continuous Water Inflow/ Solenoid issue for Panasonic Washer (Model: NA-F75S3)

Only try after your warranty have expired, otherwise any tampering might void it. This is a 4 year old washing machine, I repaired it as most of the parts are still in good working condition.

There is no error code appearing but the inflow water continuously flow in the washer even:
1) Press Pause/Stop
2) Press On/Off
3) Turn off electricity power

The only way to stop the water inflow is turn off the supply tap.

I suspect is the solenoid valve issue. As I turn on the water supply and the inflow stopped. This shows that the spring in the solenoid valve is not strong enough to spring back & block the inflow when the solenoid is de-energize.

I bought Imitation Universal Inlet Solenoid Valve from taobao cost about $7.90 and replaced it. If from shopee or lazada might about +$15.

I am not trained in handyman. Just tried to repair based on personal interest.

DO IT YOURSELF to save money and save the earth (otherwise the whole washer will be in the dumpster).

Remember to unplug power source when handling any machines

Disclaimer: I am not trained in any handyman or electrical work, please do it at your own risk.

Hope you guys can subscribe to my channel and give me some love and support

If there is any experience handyman or repairman watching my video,
Do comment on the things where I can improve on to help me hone up my skills

This video are part and pieces from different timeline as I record those old lost video footages.

All the videos are my first time doing the project. I would share what I have experience and video record along the way. It might not be the correct way. Do give advise and I will keep learning and improve.💪💪

Hope my sharing save you some money💰💰💰 and provide you with some free knowledge.

Like & subscribe my channel to support my small YouTube channel. 💕