Beginner Series: Etching - Applying a Toner Transfer Resist

Many of my pieces begin with a beautifully etched design. Over the years I have found what works best for me and thought I would share my process with you. This video focuses on applying a resist to sterling silver using a toner transfer method with glossy magazine paper.
The next video in the series will focus on the actual etching process I use. This toner resist can also be used for base metals, but this video series focuses on sterling silver.

See my available pieces at https://torchstonejewelry.com/

MATERIALS NEEDED:
Design to transfer
Glossy magazine paper
18g or 20g sterling silver sheet large enough for the design

TOOLS/PRODUCTS USED:
Image Editing Software (your choice)
Warm Ammonia Solution for cleaning (recipe below)
Ultrasonic Cleaner (optional): https://amzn.to/3t1Dycq
Jeweler's Soft Brass Brush: https://amzn.to/3tcA870
Green Scotch Brite Pad: https://amzn.to/2KS9E9k
Nitrile Gloves: https://amzn.to/3addYc3
Denatured Alcohol
Paper Towels
Laminator: https://amzn.to/3r0l2Qa (pricey but the closest to what I use)
Carrier Sheet for Laminator
Container for water
Vinyl (my preference is Oracal 651): https://amzn.to/2Md7zWj
Backing sheet for vinyl (save sheets)
Agate Burnisher: https://amzn.to/2YigIze
Clear Packing Tape
String

DISCLAIMER: Links included in the Tools/Products Used list are affiliate links. If you purchase a product or service with the links that I provide, I may receive a small commission. There is no additional charge to you! Thank you for supporting my channel so I can continue to provide you with free content.

RESOURCES:
https://www.amazon.com/
https://www.riogrande.com

AMMONIA CLEANING SOLUTION RECIPE:
2 cups water
2 tbsp. ammonia
1 tbsp. Dawn original dish washing liquid

Mix all ingredients together and store in a tight container. Best if used warm.