Скачать или смотреть How to activate the lamination module on Entrust card printers

Learn how to activate the lamination module on Entrust card printers with this step-by-step tutorial. Whether you're using an SD460 card printer, DS2, or DS3 with a lamination module, we've got you covered. In this video, we'll show you how to access the lamination settings to ensure your cards are laminated perfectly.

To start, go to your computer's 'Devices and Printers' and find your Entrust card printer. Right-click on the printer and open 'Printer Properties.' Head to the 'Preferences' tab at the bottom of the 'General' tab.

In the 'Preferences' tab, you'll find the 'Lamination' settings. Depending on your printer's configuration, you can apply lamination on both sides or just one side. The 'L1' option represents the front laminator, while 'L2' is for the back laminator.

For this demonstration, we select 'L1' to laminate the front side only and 'L2' for the backside. Additionally, we enable the 'debow card' option to prevent card bending, a standard feature to maintain card straightness.

Once you've selected, click 'Apply' and then 'OK.' Now, go to the 'Advanced' tab and choose 'Printing Defaults.' Ensure you apply these settings to both tabs for them to take effect. Revisit the 'Lamination' settings and configure them to match the general settings, with 'L1' laminating the front side only, 'L2' for the back side, and 'debow card' to prevent bending.

Again, hit 'Apply' and 'OK.' Don't forget to click 'OK' again to save your changes. Your Entrust card printer is now ready to produce beautifully laminated cards with the settings you've just configured.