Скачать или смотреть Bitspower Universal RAM Heatsink Installation and Application

This is about 40 minutes long, but I cover a ton of information and go through the process of removing your heat spreaders on your existing RAM modules, ESD strap, things you need to keep in mind as you put your RAM modules in the heat spreaders, etc. Then at the end I go through a quick visual on how to install them on the MB itself once you have done all these previous steps.

NOTE: I noticed somehow I edited this part out and wanted to ensure that everyone knows to always warm your modules before removing the heat spreaders, it softens the glue up - DO NOT OVERHEAT. Use a heat gun on low or a hair dryer to get them warmed up. You will notice my first one comes off quick, its because it was still warm. The next one had cooled down a tad that was stuck more.

This video goes over the Bitspower Universal RAM blocks and how to install RAM modules in this kit. Because it is not for Dominator style RAM, this tutorial shows how to remove the heat spreaders from existing RAM, and then install the Bitspower Heat Spreaders so you can use the water blocks to cool the RAM.

I give many tricks I learned along the way to help you reduce the time it takes for trial and error - I hope this helps some be better able to install these kinds of RAM coolers.

You can find the Bitspower Universal RAM Module kits here: http://www.bitspower.com.tw/index.php...

Thanks for watching - please give this a "like" if you find it helpful/informative.